The PowerPac 3L Instant Water Dispenser Hot & Cold PPA70/2 is a water purifier, airpot and kettle all rolled in one.
Firstly, the PowerPac Instant Water Dispenser purifies tap water with its amazing filter (PP1588) which involves a 4 Stage Filtration system: 1. Mechanical Particle Filter; 2. Ion Exchange Resin, which removes harmful metal ions such as cadmium, copper; 3. Coconut Active Carbon, which removes traces of chlorine, improves taste & odour; 4. Fine Mesh Filter.
Secondly, the PowerPac Instant Water Dispenserprovides water at various temperatures: room, 45oC, 55oC, 85oC and 100oC (boiling water) at the touch of a button. But while the airpot or kettle uses a lot of electricity to maintain hot/boiling water, this remarkable appliance only uses electricity to heat up the small quantity of water it is required to dispense - ideal for households which may not require boiling water for hours on end. As a safety precaution, to dispense hot water, first touch the Lock button before touching one of the temperature buttons.
Thirdly, the PowerPac Instant Water Dispenser dispenses the exact amount of water you require. While it dispenses either 160 ml or 260ml at a touch of a button, you can press for more water or stop the dispensing of water at any time.
Adding to these qualities are its compact size of 14 cm (width) x 25 cm (depth) x 26 cm (height); weight of 1.5 kg (empty); and its 3 litres BPA-free Water Tank, adequate for most households.
However the true beauty of the PowerPac 3L Instant Water Dispenser Hot & Cold PPA70/2 is its chic soft-touch Control Panel, and the quality of the finished product.
4 stage filtration system absorbs chlorine and heavy metals from the water, hence reducing water hardness
5 water temperature settings and 2 water dispense settings
unique 2 way dispensing system
soft touch electric control panel
Auto sensor that boils and reboils water
Makes water cleaner, healthier and tastier
BPA-free
Power 2000W
Voltage 220V, 50Hz
Packaging size 295x186x315mm(h)
Product size 140x270x265mm(h)
Weight 1.5kg
Safety Mark 230293-24
Model : PPA70/2
Dimensions : 14 (W) x 25 (D) x 26 (H) cm
Weight : 1.5 kg (empty)
Voltage range : 220 - 240 V / 50 - 60 Hz
Maximum Power : 2000 W
HOW TO USE
Soak the new Filter Cartridge (PowerPac PP1588) upright in clean, room-temperature water for 10 minutes. Rinse the new Filter Cartridge. Repeat 2 more times. Or soak the used Filter Cartridge in water from the Water Tank.
Place the appliance's Body on a dry, horizontal, stable and heat-resistant surface.
Insert (or remove) the Water Tank into (or out of) the appliance vertically. Place the Filter Cartridge inside the Water Tank. Fill the Water Tank with room temperature (not HOT) clean water to the MAX line. Close Water Tank Cover.
Attach the power cable. Switch the appliance ON. The appliance enters Lock mode.
To dispense water, press the Lock Button. The ambient light comes on. Press Normal (default), 45 oC, 55 oC, 85 oC or Boiling (100 oC). Then press 160 ml or 260 ml, press again for more water. To stop water flowing, press 160 ml, 260 ml or Lock.
When the water in the Water Tank is low, the Lock Button lights up. Refill the Water Tank.
HOW TO CLEAN
Switch the appliance OFF and unplug the power cable when not in use and before filling, emptying and cleaning the appliance.
Clean appliance's exterior and accessories (Water Tank, Water Tank Cover, Drip Tray) with detergent and water with a non-abrasive sponge. Rinse the accessories thoroughly under running water and dry with a soft, dry cloth.
DO NOT use a steam cleaner, soak the appliance's Body in water or other liquids, wash it under the tap, or let any liquid flow into the internal casing of the appliance to prevent electric shock.
Frequently Asked Questions
Shop with Confidence at Challenger
